Filter
Top Products
SV1 Receiver User and Installation Guide
8
Depending upon your mounting choice, use the
velcro strips to mount the Receiver to the dash, or, if
you are using the suction cup mount, lightly moisten
the surface of the suction cups which face the
windshield (or other surface) and press the suction
cups to the mounting surface.
Mounting the Receiver on a Visor
When the Sirius One SV1 is mounted on a visor, it
should be mounted in an upside-down orientation for
best visibility of the display screen.
Attach the visor mount to the Receiver in the
orientation shown by sliding the flat portion of the
dash/visor mount into the slot on the back top edge
of the Receiver. Gently slide the mount into the
Receiver until it snaps into place.
SNAP
Install the Receiver on the visor as shown by sliding
the clip portion of the mount onto the visor.
020 Octane
When the Receiver is initially powered on, the
display may be upside-down. To change the
orientation of the display, press and hold the DISP
button. The Receiver will remember the display
setting.
Installing the Magnetic Antenna
The optimum mounting location for the antenna is
on the roof of the vehicle, with a minimum
unobstructed area of 12 inches by 12 inches, and
exactly 6½ inches from the rear roof edge of the
vehicle (the length of the rubber antenna cable
cover/tail). It is important to avoid any obstructions