Filter
Top Products
C
ONFIGURING
THE
S
WITCH
3-52
• RADIUS Settings
- Global – Provides globally applicable RADIUS settings.
- ServerIndex – Specifies one of five RADIUS servers that may be
configured. The switch attempts authentication using the listed
sequence of servers. The process ends when a server either approves
or denies access to a user.
- Server IP Address – Address of authentication server. (Default:
10.1.0.1)
- Server Port Number – Network (UDP) port of authentication
server used for authentication messages. (Range: 1-65535; Default:
1812)
- Secret Text String – Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string. (Maximum
length: 20 characters)
- Number of Server Transmits – Number of times the switch tries
to authenticate logon access via the authentication server.
(Range: 1-30; Default: 2)
- Timeout for a reply – The number of seconds the switch waits for
a reply from the RADIUS server before it resends the request.
(Range: 1-65535; Default: 5)
• TACACS Settings
- Server IP Address – Address of the TACACS+ server. (Default:
10.11.12.13)
- Server Port Number – Network (TCP) port of TACACS+ server
used for authentication messages. (Range: 1-65535; Default: 49)
- Secret Text String – Encryption key used to authenticate logon
access for client. Do not use blank spaces in the string. (Maximum
length: 20 characters)
Note: The local switch user database has to be set up by manually
entering user names and passwords using the CLI. (See
“username” on page 4-35.)