Filter
Top Products
VLAN C
OMMANDS
4-201
Configuring VLAN Interfaces
interface vlan
This command enters interface configuration mode for VLANs, which is
used to configure VLAN parameters for a physical interface.
Syntax
interface vlan vlan-id
vlan-id - ID of the configured VLAN. (Range: 1-4094, no leading
zeroes)
Default Setting
None
Command Mode
Global Configuration
Table 4-53 Configuring VLAN Interfaces
Command Function Mode Page
interface vlan Enters interface configuration mode
for a specified VLAN
IC 4-201
switchport mode Configures VLAN membership mode
for an interface
IC 4-202
switchport
acceptable-frame-types
Configures frame types to be accepted
by an interface
IC 4-203
switchport
ingress-filtering
Enables ingress filtering on an interface IC 4-204
switchport native vlan Configures the PVID (native VLAN)
of an interface
IC 4-205
switchport allowed vlan Configures the VLANs associated with
an interface
IC 4-206
switchport gvrp Enables GVRP for an interface IC 4-219
switchport forbidden
vlan
Configures forbidden VLANs for an
interface
IC 4-207
switchport priority
default
Sets a port priority for incoming
untagged frames
IC 4-224