Sony 26-473-01 Car Video System User Manual


  Open as PDF
of 7
 
Extron • System 4
xixi
xixi
xi
Switcher Series • User’s Manual • P/N 68-428-02 Rev. C
Configuration and ConnectionsSony LCD Compatible Installation
Page 6
5. Connect the Comm Adapter to the “RS-232C/422A” port on the projector.
6. Connect the CC-50’ or (CC-100’) cable from the 9-pin male connector of the
Comm Adapter to the 15-pin HD “PJ COMM” port on the rear panel of the
System 4xi.
______ Secure all of the connector screws.
7. Ensure the projector’s RS-232C/RS-422A switch is in the RS-232C position.
8. Plug the (4 or 5) BNC connectors from one end of the (user-supplied) RGBS/HV
cable into the System 4xi output Connect the other end of the cable into the
“INPUT A” BNC connectors of the projector.
Use the illustration below as a guide when connecting the System 4xi to a Sony
RS-232 projector. Refer to Sony documentation to continue the installation.
CC 50'
9-pin
9-pin9-pin
Comm Adapter
26-473-01
Female
Male
Male
15-pin15-pin
0 1
E
____________ In a rack mount, do NOT allow the weight of the cables to be supported by the
System 4xi. See page 2-5 for cabling guidelines.
____________ Ensure the projector’s INDEX and PERIPHERAL dials are set to 01.
 previous