Filter
Top Products
NSR-1000 Series v1.1.1 Release Note
４-２ Resolved limitations in V1.1.1
・ Ther
e were some restrictions in V1.02 of the cameras/camera servers below.
(V11R:386,V11R:440,V11N:379)
SNC-RH series
SNC-RS series
SNT-EP series
SNT-EX series
The restrictions mentioned below have been solved in V.1.04.
・ When executing the preset function, detections by VMD(Camera) and VMF
don’t work.
・ Overwrite recording during the shadow tour may be disabled during a
certain period.
・ If clicking the monitor frame while the live images are monitored with
audio enabled, the live images freeze for about three seconds.
・ Audio may be interrupted intermittently.
・ RM-NS1000 was not detected correctly when connected to NSR-1000 series.
This caused a message “Unsupported Device” to be displayed and ERROR lamp
to light. (V11N:479)
This issue has been solved.
・ There was a problem that the pan/tilt movement did not stop for a certain
period after RM-NS1000 performed pan and tilt controls for SNC-RH164.
(V11R:596)
This issue has been solved.
・ There was a problem that the camera’s pan/tilt movement was uncontrollable
for a certain period if you pressed IRIS button (or MANUAL FOCUS button)
continuously for adjustment. (V11R:601)
This issue has been solved.
・ There was a problem that any monitor frame number was not displayed in the
- 29 -