Filter
Top Products
- 40 -
Specifications
*Recommended horizontal and vertical timing condition
■ Horizontal sync width duty should be more
than 4.8% of total horizontal time or 0.8µs,
whichever is larger.
■ Horizontal blanking width should be more than
2.5µsec.
■ Vertical blanking width should be more than
450µsec.
■ Maximum video pixel clock should be less than
94.5 MHz.
Design and specifications are subject to change
without notice.
LCD panel
Panel type: a-Si TFT Active Matrix
Display size: 17.1 inch (diagonally)
Display Resolution
Horizontal: Max. 1280 dot
Vertical: Max. 768 lines
Input signal
format
RGB operating frequency*
Horizontal: 28-70 kHz
Vertical: 48-85 Hz
Pixel clock: 94.5 MHz max.
PC Input signal
levels
Analog RGB video signal:
0.7 Vp-p, 75
Ω, positive
SYNC signal:
TTL level, 2.2k
Ω, positive or
negative
(Separate horizontal and vertical,
or composite sync)
0.3 Vp-p, 75
Ω, negative
(Sync on green)
Component
Video IN 2/RGB IN
Y: 1 Vp-p, 75 Ω, 0.3 V
negative sync
Pb: 0.7 Vp-p, 75
Ω
Pr: 0.7 Vp-p, 75 Ω
Video IN
S-Video In (4-pin mini DIN):
Y: 1 Vp-p, 75
Ω unbalanced, sync
negative
C: 0.286 Vp-p, 75
Ω
Composite Video (pin jack):
1 Vp-p 75
Ω unbalanced,
sync negative
Audio Output
Speaker output: 3W x 2
Headphone jack: Stereo minijack
Impedance 16-48
Ω acceptable
Audio Inputs
500 mVrms (100% modulation)
Impedance 47k
Ω
Power Requirements
Monitor:
16.5 V 3.0 A
Adapter:
Input: 100–240 V~, 50/60 Hz, 1.5 A
Output: 16.5 V 3.03 A
Power Consumption
Max. 49 W
(including AC adapter)
Operating
Temperature
5 –35 C°
Display dimensions
(w x h x d)
Upright with stand:
Approx. 472 x 405 x 184 mm
(18.6 x 15.9 x 7.2 inches)
Upright without stand:
Approx. 472 x 348 x 70 mm
(18.6 x 13.7 x 2.8 inches)
Mass
With stand:
Approx. 5.9 kg (13 lbs)
Without stand:
Approx. 5.1 kg (11.2 lbs)
Plug & Play
DDC2B
Accessories See page 8