Sony MEX-R5 Car Stereo System User Manual


 
42
Specifications
System
Laser Semiconductor laser
Signal format system PAL/NTSC switchable
DVD/CD Player section*
Signal-to-noise ratio 120 dB
Frequency response 10 – 20,000 Hz
Wow and flutter Below measurable limit
Harmonic distortion (DVD)
0.01%
Wow and flutter Less than detected value
(±0.001 % W PEAK)
* Measured from the AUDIO OUT jacks.
When you play PCM sound tracks with a 96 kHz
sampling frequency, the output signals from the
DIGITAL OUT jack are converted to 96 kHz
sampling frequency.
Tuner section
FM
Tuning range Asian model:
87.5 – 108.0 MHz (at 50
kHz step)
Latin American model:
87.5 – 107.9 MHz (at 200
kHz step)
Aerial terminal External aerial connector
Intermediate frequency 10.7 MHz/450 kHz
Usable sensitivity 9 dBf
Selectivity 75 dB at 400 kHz
Signal-to-noise ratio 67 dB (stereo), 69 dB
(mono)
Harmonic distortion at 1 kHz
0.5 % (stereo),
0.3 % (mono)
Separation 35 dB at 1 kHz
Frequency response 30 – 15,000 Hz
AM
Tuning range Asian model:
531 – 1,602 kHz (at 9kHz
step)
Latin American model:
530 – 1,710 kHz (at 10kHz
step)
Aerial terminal External aerial connector
Intermediate frequency 10.7 MHz/450 kHz
Sensitivity 30 µV
Power amplifier section
Outputs Speaker outputs (sure seal
connectors)
Speaker impedance 4 – 8 ohms
Maximum power output 52 W × 4 (at 4 ohms)
Wireless AV section (MEX-R5 only)
Transmission frequencies 2,414, 2,432, 2,450,
2,468 MHz
Modulation method FM modulation
RF output power 1.2 dBm
General
Outputs Front audio/video output
terminals
Rear audio (Z×Z)/video
output terminals (MEX-R1
only)
Rear audio output terminal
Subwoofer output terminal
(mono)
Optical digital output
terminal
Power aerial relay control
terminal
Power amplifier control
terminal
Inputs Telephone ATT control
terminal
Illumination control
terminal
BUS control input terminal
BUS audio input/AUX IN
terminal
Parking break control
terminal
Remote controller input
terminal
Aerial input terminal
Tone controls Bass: ±8 dB at 100 Hz
Treble: ±8 dB at 10 kHz
Loudness +8 dB at 100 Hz
+2 dB at 10 kHz
Power requirements 12 V DC car battery
(negative earth)
Dimensions Approx. 178 × 50 × 182 mm
(w/h/d)
Mounting dimensions Approx. 182 × 53 × 161 mm
(w/h/d)
Mass Approx. 1.3 kg
Supplied accessories Card remote commander
RM-X702
Parts for installation and
connections (1 set)
Front panel case (1)