Filter
Top Products
11
Operations
Recording an MD on a
tape
You can make an analogue recording of an MD on
a tape with the tracks in the same sequence as the
original MD.
You can also record a programme of favourite
tracks.
Recording tracks in the same
sequence as the original MD
5
6
4
7
1 Insert a blank tape.
2 Insert an MD.
3 Turn FUNCTION on the amplifier until
“MD” appears.
4 Press z REC on the tape deck.
The tape deck stands by for recording.
5 Press H on the tape deck to record
starting from the front side.
To record from the reverse side, press
h on the tape deck.
9 Press H on the tape deck to record
starting from the front side.
To record from the reverse side, press
h on the tape deck.
10 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
If you select both sides recording and the
tape reaches the end of the front side part-
way through a track, the entire track is
recorded again from the beginning of the
reverse side. When you start recording from
the reverse side, the recording stops at the
end of the reverse side even though you
select h.
11 Press S on the tape deck.
CD play and tape recording start.
When the recording is completed, the CD
player and the tape deck stop automatically.
To stop recording
Press s on the tape deck or CD player.
If the tape becomes full during
recording
The CD player and the tape deck automatically
stop.
Tip
When you want to reduce the hiss noise in high-
frequency signals recorded at low level, press
DOLBY NR after step 10 so “DOLBY NR” appears
in the display. Turning DOLBY NR on reduces the
noise when playing back these types of signals.
continued