Filter
Top Products
14
5 Press DIRECTION repeatedly until g
appears to record on one side or h (or
j) to record on both sides.
When you start recording from the reverse
side, the recording stops at the end of the
reverse side even though you select h.
6 Press S on the tape deck.
Recording starts.
7 Press H on the CD player or MD
deck.
To Press
Stop recording s on the tape deck.
Pause S on the tape deck.
Tip
When you want to reduce the hiss noise in high-
frequency signals recorded at low level, press
DOLBY NR after step 5 so “DOLBY NR” appears in
the display. Turning DOLBY NR on reduces the
noise when playing back these types of signals.
Recording from the
radio
You can make an analogue recording a radio
programme on a tape. You can use TYPE I
(normal) or TYPE II (CrO2) tape. The recording
level is automatically adjusted.
5
768
1 Insert a blank tape.
2 Press TUNER/BAND repeatedly on the
tuner to select “AM” or “FM”.
3 Press TUNING MODE on the tuner
repeatedly until “PRESET” appears.
4 Press TUNING + or – on the tuner to
select the desired preset station.
Preset number and frequency (or station
name* or RDS station name)
*
The station name appears only if you have
labelled the station (refer to the
CMT-SP55MD Operating Instructions).
5 Press z REC on the tape deck.
The z REC indicator lights up.
The tape deck stands by for recording.
Recording your favourite
portions on a tape (continued)