Filter
Top Products
5
Getting Started
Preparations
1 Stack the components vertically in the order of
tuner, amplifier, CD player, tape deck and MD
deck.
2 Disconnect the system cable supplied with
CMT-SP55MD from the SYSTEM CONTROL
3 connectors on the tuner and MD deck.
1 Connect the SYSTEM CONTROL 3
connectors (red) in the order of the
tuner, tape deck and MD deck using the
system cable supplied with TC-SP55.
S
Y
S
T
E
M
C
O
N
T
R
O
L
3
S
Y
S
T
E
M
C
O
N
T
R
O
L
3
Notes
• The system cable is used to send signals and
electricity between the components for
interlinked operation.
Be sure to insert the connector horizontally
until it clicks into place. Otherwise the system
will not operate correctly.
• Keep the system cable away from the aerials
to prevent noise or malfunction.
2 Connect the mains lead to the mains
after you complete all the connections.
Arranging the components side
by side
Once you have finished the connections, you can
rearrange the components as desired.
Tip
All information for the TC-SP55 tape deck appears in
the display on the tuner of CMT-SP55MD.