Filter
Top Products
137
US
Additional Information
• If the network controller is a computer
software controller, is the software filtered
by antivirus software or firewall software?
Permit UPnP communications between
the software and the receiver. For details,
refer to the operating instructions of the
antivirus software, firewall software, or
network controller software.
The picture/sound is poor/certain
programs display with a loss of detail,
especially during fast motion or dark
scenes.
• Picture/sound quality may be poor,
depending on Internet content providers.
• Picture/sound quality may be improved by
changing the connection speed.
• Not all content contain sound.
The picture is small.
•Press V to zoom in.
Cannot play back content.
• Some Internet content requires registration
via a computer before it can be played.
“Control for HDMI” cannot be set to
“On.”
• Set “Zone2 Out” in the “HDMI Settings”
to “Off.”
The Control for HDMI function does not
work.
• Check the HDMI connection (page 28, 30,
32, 33).
• Make sure “Control for HDMI” is set to
“On” in the HDMI Settings menu.
• When “Zone2 Out” is set to “On,” the
Control for HDMI function does not work.
• Make sure the connected equipment is
compatible with the Control for HDMI
function.
• Check the Control for HDMI settings on
the connected equipment. Refer to the
operating instructions of the connected
equipment.
• If you change the HDMI connection,
connect/disconnect the AC power cord
(mains lead), or there is a power failure,
repeat the procedures of “Preparing for the
“BRAVIA” Sync” (page 83).
• When you select “HDMI OUT B” or
“OFF,” the Control for HDMI function
does not work properly.
• If you select “HDMI OUT A” after you
have selected “HDMI OUT B” or “OFF,”
the Control for HDMI function may not
work properly for a while. This is because
the equipment connected to the HDMI
OUT A jack must re-recognize the
receiver that is equipped with the Control
for HDMI function. If the Control for
HDMI function does not work properly for
a long time, perform the steps given in
“Preparing for the “BRAVIA” Sync”
(page 83).
• The types and the number of devices
which can be controlled by the “BRAVIA”
Sync feature are restricted in the HDMI
CEC standard as follows.
– Recording equipment (Blu-ray Disc
recorder, DVD recorder, etc.): up to 3
devices
– Playback equipment (Blu-ray Disc
Player, DVD player, etc.): up to 3
devices
– Tuner-related equipment: up to 4
devices (The receiver uses one of them
for its GUI operations.)
– Audio System (AV Receiver) : up to 1
devices
Internet content
“BRAVIA” Sync (Control for
HDMI)
continued