Filter
Top Products
82
US
1)
For zone 2, HDMI signals, component video
signals, analog video and audio signals are output.
For zone 3, only analog audio signals are output.
When you select SOURCE, the signals of the
current input in the main zone are output.
2)
When SOURCE is selected, the signals input to the
MULTI CHANNEL INPUT jacks is not output
from the ZONE 2 OUT or ZONE 3 OUT jacks
even when “MULTI IN” is selected.
3)
“TV,” “PHONO,” or “MULTI IN” can be selected
in the main zone only.
4)
You can select either “FM” or “AM” from the
main zone, zone 2, or zone 3. When you want to
switch between “FM” and “AM” from zone 2 or
zone 3, select the appropriate zone using the
remote control, and then press TUNER repeatedly.
Every time you press the button, “FM” and “AM”
are switched. When different programs are
selected in multiple zones, the input you have
selected most recently is given preference.
5)
Only when SOURCE is selected in zone 2 or
zone 3, you can enjoy the content, being viewed in
the main zone, in zone 2 or zone 3.
To finish the zone 2/zone 3
operation
Press ZONE, then press ?/1.
Tip
You can select a zone on the receiver. Press ZONE
SELECT repeatedly to select zone 2, zone 3 or the
main zone. Each time you press ZONE POWER, the
output signals for the selected zone will be turned on
or off.
MULTI IN
3)
My Music
5)
aa
My Video
5)
aa
My Photo
5)
aa
Internet services
5)
aa
INPUT ZONE 2
1)
ZONE 3
1)