Filter
Top Products
16
Press the PTY / SLK button twice to show the speech type program. Then press 1-6 button
to choose the different speech type program. Each number key will show 3 different speech
program for you to choose.
Function Mask DPI- Mask all
Press the sound select button for 2 seconds.
Press the SEL button to cycle through to “Mask DPI”.
Rotate the encoder volume to toggle between MASK DPI and MASK ALL mode.
Leave the unit idle for the mode to take effect.
During MASK DPI mode the unit will mask only the AF which has different PI, this is the
default mode. During MASK ALL mode the unit will mask the AF which has different PI and
no RDS signal with high field strength.
Retune S / L – Short / Long function
This function is to set the initial duration of automatic TA Search.
Press and hold the sound select button for 2 seconds until “TA SEEK” is shown on the
LCD.
Press the SEL button to cycle through the menu selections until “RETUNE_S” is shown.
Use the VOL+ /- button to choose “RETUNE_S” or “RETUNE_L”.
The default is “RETUNE_S”.