StarTech.com RACKCONS1708 Car Video System User Manual


 
Instruction Manual
16
Auto Scan
In this mode, the Console automatically switches from one powered computer to
the next, sequentially in a xed interval. During Auto Scan mode, the OSD displays
the name of the selected computer. When Auto Scan detects any keyboard or mouse
activity, it suspends the scanning until activity stops; it then resumes with the next
computer in sequence. To abort Auto Scan mode, press the left <CTRL> twice, or, press
any front button. Scan Type and Scan Rate set the scan pattern. Scan Type (<F4>:More\
Scan Type) determines if scanned computers must also be eye mark selected. Scan
Rate (<F4>:More\Scan Rate) sets the display interval when a computer is selected
before selecting the next one.
Manual Scan
Scan through power-on computers one by one by keyboard control.Scan Type
(<F4>:More\Scan Type) determines if scanned computers must also be eye mark
selected. Press the up arrow key to select the previous computer and the down arrow
key to select the next computer. Press any other key to abort Manual Scan mode.
Audio Stick
An optional multimedia module can be linked to the back of each KVM Module for
selecting microphone and stereo speaker signals. There are two options for Audio Stick:
On and O. When set to On, audio selection follows computer selection.
When set to O, audio selection stops following computer selection.
It is useful if you want to listen to a particular computer’s audio signal
while operating other computers. The non-volatile memory stores the
Audio Stick setting.