Filter
Top Products
D1374201_User_Manual_T550_T770_MXP_CCM
18
holding Layout for 1 second. It is recommended to use Picture outside Picture for wide screen
monitor systems.
How to use Layout button with POP:
1. Press the Layout button to get the 1+3 layout. The far end image will be displayed as the
main video, with the near end, usually the user of the system, as a smaller image in the
upper right corner.
2. Press the Layout button again to see the images side-by-side, e.g. 1+1 layout, where the
far end and near end are displayed as images of equal size, see figure below.
3. The third time the Layout button is pressed, the normal full screen view of the far end is
displayed..
4. Pressing and holding Layout for 1 second will always bring you back to full screen.
Note that if both TV monitor format and VGA format is set to Normal, the system will skip the 1+3
layout, which is not beneficial for 4:3 monitors.
Example of POP
Example of Side by Side