Filter
Top Products
75
Setting up your TV
Locking channels
If the correct code is entered, the program lock mode is released
and the normal picture appears. All locking will be enabled
again when you change the channel.
Using the input lock feature
You can use the Input Lock feature to lock the video inputs (Video,
ColorStream
®
HD, HDMI 1 and HDMI 2) and channels 3 and 4.
You will not be able to view the input sources or channels until you
unlock the inputs.
To lock/unlock the video inputs:
1 In the Options menu, highlight the Parental Control and
Locks, and then press the ENTER button.
2 Enter your four-digit PIN code.
3 Highlight Input Lock, and then press the ENTER button.
4 Press the ▲/▼(arrow) buttons to select the level of video input
locking you prefer (see table below for descriptions), and then
press the ENTER button.
Mode: Description:
Video Locks Video, ColorStream
®
HD, HDMI 1 and HDMI 2.
Video+ Locks Video, ColorStream
®
HD, HDMI 1, HDMI 2 and channels 3 and 4.
Select Video+ if you play video tapes via an ANT/CABLE input.
Off Unlocks all video inputs and channels 3 and 4.
Locking channels
With the Lock feature, you can lock specic channels. Locked
channels can only be accessed by entering the PIN code, see “Enter
a new PIN code” on page 70
To lock channels:
1 From the Options menu, highlight Channel Options, and then
press the ENTER button.