Filter
Top Products
87
Setting up your TV
Using HDMITM CEC
These functions depend on the devices that are connected.The
HDMI
TM
CEC Player Control item will be grayed out in the following
conditions:
v A non-HDMI
TM
input is currently selected.
v The Enable HDMI CEC item is set to Off.
v The connected CEC device is not a playback or recording device.
HDMI
TM
CEC input source selection
If a HDMI
TM
CEC device with HDMI
TM
switching capability (e.g.
Audio Receiver) is connected to the HDMI
TM
input, you can select
another HDMI
TM
CEC device that is connected to the master
HDMI
TM
device using the TV’s INPUT button, see “Selecting the
video input source” on page 47
VOLUME and MUTE controls of Audio Receiver
With your TV’s remote control, you can adjust or mute the sound
volume of the Audio Receiver.
v VOL (+ –) buttons adjust the volume level.
v MUTE button turns off the sound.
To use this function:
v Set Speaker Preference to Receiver in the HDMI CEC Setup
menu.
v Conrm that a connected HDMI
TM
CEC device (such as DVD
player, etc.) is selected for the Audio Receiver input source.
These functions depend on the device connected.
Other HDMI
TM
CEC functions
When the Enable HDMI CEC Control and each item in the
HDMI CEC Control Setup menu are set to On, the following
functions will be enabled.
Item: Description:
TV Auto Power If a HDMI
TM
CEC device is turned on, the TV turns on automatically.
Auto Standby If the TV is turned off, the TV will send a message to turn off all of the HDMI
TM
CEC devices connected to the TV.
Using HDMI
TM
CEC