Filter
Top Products
88
Setting up your TV
Using the HDMITM settings feature
When you turn on the Audio Receiver, change its input source or
adjust the sound volume, the sound will be output from the audio
receiver’s speakers even if TV Speakers has been selected. Turn the
TV off and on again to output the sound from the TV speakers.
Setting up HDMI
TM
CEC
To set the HDMI
TM
CEC Setup:
1 From the Options menu, highlight HDMI CEC Control
Setup and press the ENTER button.
2 Highlight Enable HDMI CEC Control, and then press the
ENTER button.
3 Select On, and then press the ENTER button.
If you select Enable HDMI CEC Off, the other items will be grayed
out.
4 Press the /▼(arrow) buttons to highlight the HDMI
TM
CEC
Setup item you want to use, and press the ENTER button,
follow by /▼(arrow) buttons.
v TV Auto Power: On/Off
v Auto Standby: On/Off
Using the HDMI
TM
settings feature
HDMI
TM
1(or 2) RGB Range
You can select RGB range of HDMI inputs from the following
modes, as described below:
1 From the Options menu, highlight Input Options, and then
press the ENTER button.
2 Highlight HDMI 1(or 2 ) RGB Range and then press the
ENTER button.
3 Press the /▼(arrow) buttons to select Auto, Full, or Limited,
and then press the ENTER button.
Mode Description
Auto(default) Adjusts RGB full range signal automatically.
Full RGB input signal is displayed in the range from 0 to 255.
Limited RGB input signal is displayed in the range from 16 to 235.
HDMI
TM