Filter
Top Products
User’s Manual 4-9
Operating Basics
3. Push the center of the disc tray to close it. Press gently until it locks into
place.
How to remove discs when the disc tray will not open
Pressing the eject button will not open the disc tray when the computer
power is off. If the power is off, you can open the disc tray by inserting a
slender object (about 15 mm) such as a straightened paper clip into the
eject hole near the eject button.
Figure 4-7 Manual release with the eject hole
Writing CD/DVD/BDs
You can use the BD-Writer drive to write data to either CD-R, CD-RW,
DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R (Double Layer),
DVD+RW, DVD-RAM, BD-R, BD-R (Dual Layer), BD-RE or BD-RE (Dual
Layer) discs.
You can use the BD-Combo/DVD Super Multi drive to write data to either
CD-R, CD-RW, DVD-R, DVD-R (Dual Layer), DVD-RW, DVD+R, DVD+R
(Double Layer), DVD+RW or DVD-RAM discs.
1. Eject hole
1
Turn off the power before you use the eject hole. If the disc is spinning
when you open the disc tray, the disc could fly off the spindle and cause
injury.
■ Some models in this series are equipped with a BD-Combo/BD-Writer
drive which can write CD/DVD/BDs.
■ Some models in this series are equipped with a DVD Super Multi drive
which can write CD/DVDs.