Filter
Top Products
Appendix B
Safety & Maintenance
Safety
To avoid risk of electric shock, follow all safety notices and do not disassemble the touchmonitor
or Computer Module. They are not user-serviceable.
The slots located on the sides and top of the touchmonitor case are for ventilation. Do not block
or insert anything inside the ventilation slots.
The touchmonitor is equipped with a 3-wire, grounding power cord. The power cord plug only
fits into a grounded outlet. Do not fit or modify the plug into an outlet that has not been
configured for this purpose. Do not use a damaged power cord. Only use the power cord
that came with your Elo TouchSystems TouchMonitor. Use of an unauthorized power cord
might invalidate your warranty.
Ensure that your installation is equipped to maintain the specified environmental conditions
listed in the Technical Specifications in Appendix C.
Care and Handling
The following tips will help keep your touchmonitor functioning at an optimal level:
• Disconnect the AC power cable before cleaning.
• To clean the display unit cabinet, use a cloth lightly dampened with a mild detergent.
• It is important that your unit remains dry. Do not get liquids on or inside the unit. If liquid
does get inside, have a qualified service technician check it before you power it on again.
• Do not wipe the screen with a cloth or sponge that could scratch the surface.
• To clean the Touchscreen, use window or glass cleaner applied to a clean cloth or sponge.
Never apply the cleaner directly to the touchscreen. Do not use alcohol (methyl, ethyl or
isopropyl), thinner, benzene, or other abrasive cleaners.
User Manual – Interactive Digital Signage
SW601176 Rev A - Page 30 of 45