Filter
Top Products
Installing the APR Touch Technology Software
(for Windows 7, Vista, XP, WEPOS, and 32-bit Server 2003)
Some software installation is required for your APR touchmonitor to work on your computer.
Visit the Elo TouchSystems website www.elotouch.com for:
• The latest touch driver versions
• Additional touch driver information
• Detailed touch driver installation guides
• Touch drivers for other operating systems
1. Disconnect the USB cable between the monitor’s USB connector and your PC’s USB
port.
2. Install the APR driver onto your computer
• Insert the APR TouchTools CD into your computer. The CD should automatically start
the Elo installation program. (Alternatively, download and run the latest drivers
available from the Elo website)
• Follow the steps given by the Elo installation program.
3. Install the APR Calibration file onto your computer.
• Make sure the APR driver has been installed first.
• Insert the touchmonitor’s unique APR Calibration USB Drive into your computer’s USB
port.
• The APR Calibration USB Drive contains only one file. Copy this file into the folder
“C:\Program Files\EloTouchSystems\APRdata”
User Manual – Interactive Digital Signage
SW601176 Rev A - Page 9 of 45