Varta V-DV800BT Car Stereo System User Manual


 
V-DV800BT
44
Bluetooth Operation
1. Before using Bluetooth, please make sure the mobile phone you use supports Bluetooth functions (Headset or
Handsfree profiles or both).
2. Before using Bluetooth, please make sure you completed pairing with your mobile phone first. Please refer to the
user manual, section “PAIRING”. To ensure the best reception for pairing or reconnection, please make sure the
phone battery is fully charged.
3. Please always try pairing the mobile phone with head unit after a few minutes of the mobile phone was switched on
to ensure the best pairing result.
4. “BT60” is unit model number, which is displayed on the mobile phone.
5. To achieve the best performance, please always keep the mobile phone within 3 meters of the head unit.
6. Please always keep a clear path between the mobile phone and the head unit.
7. Never put any metal object or any obstacle between the path of the Mobile Phone & the Head unit.
8. Some brands of mobile phone like Sony Ericsson may have "Power Saving Mode" selection when Bluetooth mode
is switched on. Please do not switch ON Power Saving Mode when operating with this head unit, as some abnormal
communal behavior will happen occasionally.
9. Before you make Outgoing call or Incoming call, make sure the mobile phone Bluetooth function is switched “ON”.
10. To ensure the best conversation quality/performance, please always keep talking within 1 meter of the head unit.
11. If you want to disconnect the head unit with the mobile phone, please switch off Bluetooth connection on the
mobile phone or go to the system menu “disconnect” to disconnect the Bluetooth connection manually (please refer
to the user manual, section “disconnection of the Bluetooth system” for details instruction).
12. Some mobile phones can support “IN BAND RING TONE”, such as Nokia. In such case, the Incoming Ringing
Tone will be the same as the original Ring-tone of the mobile phone. But some mobile phones like Sony Ericsson
do not support this feature. The Ring-tone will be using the standard Ring-tone of the Head unit.
13. When in telephone mode, during talking, it is highly recommended to set the volume below “30” in order to achieve
the best sound quality. As if the volume is too high, it may create unwanted echo inside the car, and this unwanted
echo may feedback into the microphone.