Filter
Top Products
5
.
www.velodyne.com
SubContractor User’s Manual
(
9) Thru Jacks
(See Figure 3A)
These RCA connectors are for passing along the same signal that goes into your subwoofer
t
o a second “daisy-chained” subwoofer. The signal from these RCA connectors is the same
as the input signal.
(10) Line Input / LFE Input (See Figure 3A & 3B)
Connect these jacks to the LINE OUT preamp output, LFE output, or subwoofer output jacks
of your receiver/processor. If using the LFE output from your receiver or processor, plug
the single cable into the jack labeled LFE input or, for more signal, use a “Y” connector and
feed the signal into both “R” and “L” inputs.
Option 1
Figure 3A: Mono (LFE) Line-Level Connection.