Verona CR 43 Car Stereo System User Manual


 
Verona CR 43 - Honda
16
Important Notes
What You Should Read By All
Means!
Before starting to use your new car radio, you
should carefully read through the safety no-
tes and the information about “Anti-Theft
Coding”.
Safety Notes
Road Safety
Being the driver of a motor vehicle you should
dedicate your full attention to the traffic around
you. Therefore always use your car stereo
such that you are able to cope with the
present traffic situation in any moment.
In difficult driving situations you should turn
your set off. Please take into account that at
a speed of 50 km/h you are almost covering
a distance of 14 m per second!
When adjusting the volume, always make
sure that acoustic signals from the outside
can still be heard in order to be able to react
to alert signals just as it is required by the
present situation.
our central customer service workshop or to
one of our dealers in your vicinity.
First-time Operation and Restart Follo-
wing Interruption of Power Supply
Switch on set.
“Cod” will appear in the display :.
Briefly press preset button 1 ;, “000”
will appear in the display :.
Enter the code number from the Blau-
punkt car radio pass:
Example: Code number is 1521
- press preset button 1 ; once,
“1000” appears in the display :,
- press preset button 2 ; 5 times,
“1500” appears in the display :,
- press preset button 3 ; 2 times,
“1520” appears in the display :,
- press preset button 4 ; once,
“1521” appears in the display :.
Confirm code number:
Press upper part of rocker switch
/
2.
Note:
Using preset button 1 the set can only be
adjusted to “1” or “0”. “0” is not indicated in the
display.
If you have entered and confirmed an incor-
rect code number, “---” will initially appear in
the display : and then, after a certain time
Anti-Theft Coding
Your radio is protected against theft by an
anti-theft coding system. If, once the unit has
been encoded, the power is disconnected
from the set (e.g. theft, disconnection of the
car battery or prior to installation), the set is
electronically blocked. It may only be used
again after the appropriate code number has
been entered (see car radio pass). Hence, a
coded set is of no use to a potential thief.
Wrong Code Number Entered
It should not be possible for thieves to ascer-
tain the code number by trial-and-error. This
is why the set is blocked for a certain period
of time if an incorrect code number is ente-
red. “---” would then appear in the display :.
This time period is 10 seconds following the
first three attempts, and is increased to 1
hour following subsequent attempts.
After 19 unsuccessful attempts “OFF” will
appear in the display : and the set can no
longer be started.
Note:
Keep your car radio pass, which contains the
code number, in a safe place in order to avoid
“unauthorized access” to your car radio. If
you lose your radio pass and have forgotten
your code number you will not be able to
restart the set after the power supply has
been interrupted. The only way to make the
set operable again is by sending the radio to