Filter
Top Products
17
Verona CR 43 - Honda
DEUTSCH
ENGLISH
ITALIANO
PORTUGUES
NEDERLAND
ESPAGÑOL
SVENSKA
FRANÇAIS
period, “000”. Following this, it is essential
that you enter the correct code number.
Switching Code System Off
If you wish to switch the anti-theft code sy-
stem off:
● turn off the radio,
● simultaneously press, and hold, preset
buttons 1 and 4 ;
● turn the set back on. “Cod” will then
appear in the display :.
● release the preset buttons 1 and 4 ;.
“000” then appears in the display :.
● Enter the code number that is in the
Blaupunkt car radio pass and confirm:
See example “First-time operation ...”.
The anti-theft coding system has now been
deactivated.
Switching the Code System Back On If
you wish to re-activate the anti-theft
code system:
● turn the radio off,
● simultaneously press, and keep de-
pressed, preset buttons 1 and 4 ;,
● turn the set back on. “Cod” briefly ap-
pears in the display : and then the set
is switched on.
Amplifier Section
ON/OFF
For switching the set on,
● turn button 1 .
Your stereo is now ready for operation.
For switching the set off,
● turn button 1
.
Volume control
● turn button 1.
Balance Control
Use button 1 to balance the sound impres-
sion of the right and left channel speaker.
● Pull (lock in) button and turn.
After the adjustment
● slightly press button.
Fader control
If four loudspeaker are connected, the front/
rear sound impression of the loudspeakers
(fader) can also be modified using lever B.
Adjusting trebles
● turn button @.
Adjusting basses
● turn button A.
The anti-theft code system is now activated.
Now whenever the set is turned on, “CODE”
will appear briefly in the display :.
Optical indication of theft protection
As optical warning of the encoded car radio,
the LED
6 flashes when the ignition is
switched off, provided the car radio has been
connected correspondingly.
For this, please see the corresponding instal-
lation instructions.