Filter
Top Products
VIZIO SV421XVT & SV471XVT User Manual
10
www.VIZIO.com
Setting Up Your HDTV
Note: We strongly recommend that two people perform the setup and assembly due to the weight and
size of the TV.
•
Read this user manual carefully before installing your HDTV.
•
The power consumption of your HDTV is about 144W (AVG) for the SV421XVT and 204W (AVG)
for the SV471XVT. Use the included power cord. When an extension cord is required, use one
with the correct power rating. The cord must be grounded and the grounding feature must not be
compromised.
•
Your HDTV should be installed on a flat surface to avoid tipping.
•
For proper ventilation, you must allow space between the back of your HDTV and the wall.
•
If you want to mount your HDTV on the wall, see below for additional information.
•
Avoid installing your HDTV in places with high humidity, dust, or smoke so you do not shorten the
service life of the electronic components.
•
Install your HDTV in a level, landscape orientation, with the VIZIO logo at the bottom to prevent
poor ventilation and excessive component damage.
VIZIO offers professional installation services. Conta
ct VIZIO for more information on these services at
888-VIZIOCE (888-849-4623) or www.VIZIO.com.
Wall Mounting your HDTV
Your HDTV can be mounted on the wall for viewing. If
you choose to mount your HDTV on the wall, follow the
instructions below.
1. Remove the stand base and neck:
a. Disconnect the cables from your HDTV.
b. Place your HDTV face down on a soft, flat
surface to prevent damage to the screen.
c. Remove the eight (8) screws holding the
stand, then p
ull downward on the stand and
lift the stand off your HDTV.
Note: To
remove the base from the neck, unscrew
thumbscrew on bottom.
2. Mount your HDTV on the wall:
a. Attach your HDTV to a wall mount (sold
separately) using the mounting holes in the
back panel of your HDTV.
b. Read the instructions that came with your
spe
cific wall mount to properly hang your
HDTV.
Note: Use M
6 x 20MM 1.25 pitch screws.