Filter
Top Products
VIZIO SV421XVT & SV471XVT User Manual
Version 4/16/2009 53
www.VIZIO.com
atellite Box Remote
s 000, 047, 050, 067, 329, 331 and 339 to work your HDTV. To use a cable
te to work the HDTV, refer to your cable or satellite remote user guide for more
st try 11758 and then, if
ry 1758 and then 0178 as
ish Network for example),
ote: Some buttons may not function as expected on your cable or satellite remote. Typically power,
e and mute will work.
d below are the
teps for programming your DVD player, Home Theater System, and a Cable or Satellite box. Once you
codes, write them in the table provided.
g code for your DVD player in the code list below and enter it using the
number buttons. If the code is accepted, the LED flashes twice after the last digit is entered. If
e LED does not flash twice, repeat Steps 2 through 4 with the next code listed.
will
turn off. If the DVD player does not turn off, repeat Steps 2 through 4 with the next code listed for
ponent and manufacturer.
for Component Codes.”
er codes that may include
Home Theater System
1. Turn on the home theater system.
elease the AUDIO button on the remote control.
code list below and enter it using
ce after the last digit is entered.
at Steps 2 through 4 with the next code listed.
5. Point the remote control at the Home Theater System and press the POWER button. The Home
Theater System will turn off. If the Home Theater System does not turn off, repeat Steps 2
through 4 with the next code listed for the component and manufacturer.
Notes:
• If the codes do not work or your brand is not listed, see “Searching for Component Codes.”
• Sometimes a code listed will only include limited functions. Try other codes that may include
more functionality.
Chapter 7 Programming the VIZIO Universal
Remote Control
Using a Cable or S
Your VIZIO remote uses code
or satellite remo
information on how to program the remote.
If your cable
or satellite remote uses a 5-digit code (like most Direct TV units), fir
that does not work, 10178. If your cable or satellite remote uses a 4-digit code, t
an alternative. If your cable or satellite remote uses a 3-digit code (Echostar or D
use code 627.
N
volum
Programming other devices
Your remote control is programmable and supports up to three different devices. Liste
s
find your
Programming your DVD Player
1. Turn on the DVD player.
2. Press and release the DVD button on the remote control.
3. Press and hold the SET button until the LED flashes twice.
4. Find the programmin
th
5. Point the remote control at the DVD player and p
ress the POWER button. The DVD player
the com
Notes:
•
If the codes do not work or your brand is not listed, see “Searching
• Sometimes a code listed will only include limited functions. Try oth
more functionality.
Programming your
2. Press and r
3. Press and hold the SET button until the LED flashe
s twice.
4. Find the programming code for your home theater system in the
the number buttons. If the code is accepted, the LED flashes twi
If the LED does not flash twice, repe