Filter
Top Products
16
Cassette Deck
Descriptions and Functions
1. LEVEL KNOB -
When recording to the cassette deck, use this control to increase or decrease the incoming signal
level for precise recording results.
2. LEVEL INDICATOR -
This LED meter refl ects the record signal level in “real-time” to allow for accurate record level
adjustment.
3. CASSETTE DECK -
Insert the tape here.
4. EJECT BUTTON -
P
ress to open cassette door and insert or remove a tape.
5. COUNTER DISPLAY -
Use the tape counter when playing or recording cassettes to keep track of your location on
the tape.
6. COUNTER RESET -
Reset the counter to zero.
7. SPEED ADJUST KNOB -
Adjust the speed of your playback/recording by turning clockwise to increase the speed,
turn counter-clockwise to decrease speed.
8. PLAYBACK INDICATOR -
This indicates the playback mode enabled.
9. MODE BUTTON -
Select three playback modes
: SINGLE SIDE PLAYBACK, DUAL SIDE PLAYBACK, CONTINUOUS
PLAYBACK.
10. CASSETTE DECK CONTROLS:
REC -
To enable record mode, press this button. For detailed instructions see
“Cassette Deck Recording.”
REW -
When playing a cassette, this key can be used to rewind the cassette to the
previous location.
R. PLAY -
Play the reverse side of the tape.
STOP -
Press this key to stop a cassette from playing or recording.
F. PLAY -
Play the forward side of the tape.
F. FWD “FAST FORWARD” -
When playing a cassette, this key can be used to advance
the cassette to the next desired location.