Filter
Top Products
17
Rear Panel
Descriptions and Functions
1. HEADPHONE OUTPUT -
Connect headphones to this
¼
” input.
2. XLR MICROPHONE INPUTS -
Connect three XLR
micro
phone connec
tions here. Each input corresponds with
controls on the front panel of the CDG-6000RV.
3. XLR STEREO OUTPUT -
Output the CDG-6000RV
via left and right XLR
cables.
4. NTSC/PAL SELECTOR SWITCH -
This switch is used to select the NTSC/PAL setting according to country. For
U.S. televisions systems it should be set to NTSC and for European television systems the selector should be set
to PAL.
5. VOLTAGE SELECTOR SWITCH -
This switch is used to select the voltage setting according to country. For use in
the U.S. the voltage selector should be set to 115V and 230V in Europe.
6. 115V/230V AC OUTLET -
This outlet can be used to connect another component providing it does not exceed
250 watts maximum power consumption.
7. SPEAKER JACKS -
Use these speaker jacks to connect speakers.
8. AUX AUDIO INPUT -
Connect RCA stereo cables from your audio output device.
9. DVD INPUT -
Connect RCA stereo and video cables from your DVD player output.
10. MEDIA INPUT -
Connect any additional media player or audio output device to this audio/video RCA connection.
11. AUDIO PRE-AMP OUTPUT -
Output the
audio from your CDG-6000RV
via RCA audio cables.
12. VIDEO OUTPUT -
Outpu
t the video
from your C
DG-6000RV
via RCA video cables.
13. EFFECT LOOP INPUT/OUTPUT -
These jacks allow an External Effect or EQ Device to be connected to the CDG-
6000RV and applied to the source music (see page 10 for more details)
.
NOTE:
When an External Effect or EQ Device is not connected, the EFFECT LOOP BARS must be inserted for
speaker output.
14. POWER INPUT -
Connect the power cord (included) here.