Filter
Top Products
11
Determining the proper way to connect the speaker cables:
The speaker cable is a pair of insulated cables running side by side. One cable is colored or shaped differently, perhaps
with a stripe, groove or ridges.
1. Connect one end of the striped (grooved, ridged, etc.) cable to the
“+” (red) terminal on the rear panel of the HV-1200.
2. Connect the other end of the striped (grooved, ridged, etc.) cable
to the “+” (red) terminal on the speaker.
3. Connect one end of the “plain” (NO stripes, grooves, ridges, etc.)
cable to the “--” (black) terminal on the rear panel of the HV-1200.
4. Connect the other end of the “plain” (NO stripes, grooves, ridges,
etc.) cable to the “--” (black) terminal on the speaker.
Connecting a device to the PRE OUT jacks
The L/R (red and white) RCA PRE OUTPUT jacks on the rear
panel can be connected to any self-powered input device with RCA
inputs. (i.e. recording device, powered speakers, etc)
What you will need:
• Powered device with L/R RCA inputs
• RCA L/R audio cable (red & white)
1. Connect one end of the red and white RCA cable to the PRE
OUTPUT jacks on the HV-1200’s rear panel.
2. Connect the other end of the red and white RCA cable to the
RCA inputs on the recording device, powered speakers, etc.
Connecting a Powered Subwoofer
The HV-1200 has two types of connections for subwoofer output.
This is for compatibility with different types of subwoofers. See your
subwoofer instruction manual to determine if you need an XLR or
¼” cable.
What you will need:
• Powered Subwoofer
• XLR or ¼” cable
To connect a Powered Subwoofer to the HV-1200
1. Connect one end of the XLR or ¼” cable to the rear panel of
the HV-1200.
2. Connect the other end of the XLR or ¼” cable to the input on
the powered subwoofer.
Getting Connected cont.