Filter
Top Products
8
Default
- Load default setting.
AV2 First
- Set whether to have monitor switch to Video Input 2 automatically if a signal
is present. Good for car reverse monitoring system.
Scaler
- Set the display mode to 16:9 or 4:3. Set it to 4:3 if your video signal is in 4:3
aspect ratio and you don’t want the display to be stretched out. Default is
16:9.
External Specifications:
Video Source Input
• RGB analog male connector (15-Pin D-SUB) x 1
• RCA composite video female connector x 2
Audio Source Input
• RCA audio female connector x 1 is of no function
Touch Panel I/O
• USB connector x 1
Power Source Input
• Single 12V DC_IN (Supports 11V ~ 24V)
External Buttons Input
• OSD buttons for Menu/Select/Increase/Decrease
• PWR button for power switch
Internal Specifications:
LCD Module : 7” Digital TFT LCD
LCD Native resolution : 800 x 480 (2400 x 480 dots)
Pixel Pitch : 0.1905 x 0.1905 mm
LCD Panel Brightness : 400 NIT
Contrast : 150 : 1
Response Time : 56ms
Viewing Angle : Vertical: 90 / Horizontal: 120
Supported display resolution : 640 x 480 ~ 1600 x 1200
Supported refresh rate : 60 ~ 75 Hertz
Video Format : NTSC/PAL Auto-detect
Colors : 18-bit (262,144 Colors)
Inverter Inside : Adjustable output w/ Power Mgmt
9
Electrical Characteristics:
Absolute Maximum Ratings:
Parameter Symbol Min Max Unit
Analog Signal Input Level Signal 0 1.4 Vp-p
Power Supply DC IN 11 24 V
Digital Signal Input Level - - 5+0.3 V
Operation Temperature - -14 176 ºF
Recommended Operating Conditions:
Parameter
Symbol
Min
Typical
Max
Unit
Signal 0.5 0.7 1.2 Vp-p Analog Signal Input Level
RGB/Composite AV
DC GND - 0.3 V
DC IN 11 12 24 V
Power Supply
Current 0.59 0.72 0.74 A
Power Consumption:
Standby mode < 0.3W
Suspend mode < 3W
Continue mode < 4W (w/o inverter), <9W (w/ inverter)
Inverter output specifications:
Power supply: +12V
Lamp frequency: 50KHz
Max output open voltage: 1300Vrms
Power consumption: < 5W