Filter
Top Products
128-7218
10 of 20
-10-
MOUNTING
PLATE-TO-CRADLE
RETAINER TAB
PLASTIC LINER
AND ADHESIVE
BACKING
MOUNTING
BASE
ASSEMBLY
SCREW HOLES
(4) FOR DIRECT
HARD MOUNTING
BASE/CRADLE
MOUNTING
PLATE
SWIVEL
ADJUSTMENT
KNOB
SWIVEL
ADJUSTMENT
KNOB (REF)
NOTE: Allow a 72-hour period for the adhesive
backing to cure completely.
3. Installing the Cradle Using Double-Sided Tape
You can mount the cradle directly to your dashboard
or other flat surface without using the cradle
mount in the kit.
a. Remove the 3/4” x 3” double-sided tape from
the supplied kit.
b. Determine the location of the cradle, and clean
the mounting surface as before.
c. Peel the backing from one side of the tape, and
press the tape in place on the rear or bottom
cradle mounting plate.
d. Peel the backing from the exposed side of the
tape and carefully position the cradle on the
mounting surface, gently pressing the cradle
into place.