Filter
Top Products
128-7218
14 of 20
-14-
b. Place the antenna at the preferred location on
the roof or trunk surface. If the vehicle is
equipped with a roof or trunk rack, the antenna
may have to be mounted off-center on the
surface. The magnet will secure the antenna in
the desired position.
c. Apply power to the XR9 system as outlined
in the associated User Guide and obtain an
audio output. If no audio is heard, first check
the signal strength indicator located on the
bottom left corner of the display to ensure the
antenna is receiving an optimum signal. If
necessary, move the antenna to different
positions on the surface until an audio output
is heard. The desired antenna position
should be marked with masking tape or by
another non-scratch method.
7. Mounting the Vehicle Antenna
The antenna should be placed on a relatively flat
surface on the vehicle exterior, preferably on the
roof (high point) or on the trunk (convertible). To
mount the antenna:
a. Plug the antenna into the ANT connector
on the back of the cradle.
d. After determining the optimum position, turn off
XR9 power, disconnect the power adapter from
the vehicle cigarette lighter receptacle and
disconnect the antenna cable.
SAT
ANTENNA
(TYPICAL)
12VDC-TO-6VDC
ADAPTER
XR9
(TYPICAL)
JUMP
s.seekp.tune
Ca teg ory A- 112:0 0P
Artist
Song
001Chan nel Nam e