Filter
Top Products
128-7218
11 of 20
-11-
NOTE: The cradle contains a rear mounting
plate with four M4 x 7 threaded holes
for attachment to the vehicle-specific
after-market bracket. Four M4 x 8 Philips
screws are supplied with the mounting
base for this purpose.
REAR
MOUNTING
PLATE
CRADLE
ASSEMBLY
(REAR VIEW)
DC IN FM OUT
AUX
AUDIO ANT
THREADED
HOLES (4)
4. Using Other Manufacturer’s Mounts
The XC9 Cradle can also be installed using other
manufacturer’s mounts; the mounting plate
provisions on the rear of the cradle
5. Installing the XR9 into the Cradle
Install the XR9 as follows:
a. Carefully line up the XR9 rear spine grooves
with the cradle guide spines; slide the latch tab
lever to the unlock (
) position, and lower the
XR9 into the cradle.
provideyou with multiple mounting options within
the vehicle using various vehicle-specific
aftermarket brackets, such as those purchased
separately from Panavise, Pro-Fit, etc.