Filter
Top Products
AM16629-1 Rev. C pg. 9 of 12
Printer Installation
The QL 420 Printer can now be installed in the Mobile Mount. Secure the printer to the
Mobile Mount Bracket with (4) #8-32 x 3/8” Screws, Lock Washers and Flat Washers. (See
Figure 5). Plug the output voltage cable from the Mobile Charger into the bottom of QL 420
Printer. (Note: In some installations it may be easier to plug the charger cable into the
printer prior to securing the Printer to the Mobile Mount.) If desired, you can use one of the
supplied cable clamps and a #6-32 x 1/4” screw to hold the cable in position.
Charge cable from
RCLI-DC Charger
#8-32 x 3/8” Truss Hd. Screw
(p/n TH-SD1405)
#8 Lock Washer
(p/n TH-WB0708)
#8 Flat Washer
(p/n TH-WA0712)
supplied with Mobile Mount Kit.
Fanfold Bin (p/n 52520)
1/4-20 x 1/2” Bolt, supplied
with Mobile Mount Kit
(p/n TH-SK2007)
Figure 5:
Printer Installation
Data I/O Cable