A SERVICE OF

logo

7. Power up the installation according to the following procedure:
a. Switch on the power for the First Station. Wait for the unit to ascertain its
Station ID and display it on the Station ID LED. (The Station ID for the
First Stage unit is 01, the ID for the Second Stage unit is 02, the ID for
the Third Stage unit is 03, etc.).
b. Switch on the power for each Station on the installation in turn (Second
Station, then Third Station, etc.). In each case, wait for the Station ID to
be ascertained and displayed on the current Station before powering on
the next one.
c. After all the Stations are up, power on the computers.
KA9270
KA9220
12345678 910111213141516
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
21
43
12345678 910111213141516
17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32
21
43
2004-08-04
20