CS72D / CS74D User Manual
16
Mouse Port-switching
The Mouse Port-switching function can be enabled or disabled. The default
setting is disabled. To enable, do the following:
1. Invoke HSM (see page 13).
2. Press [W] or [w] [Enter].
This procedure is a toggle. Repeat to disable.
Note: The feature is only supported when mouse emulation is enabled. See
Mouse Emulation Control, above.
Power On Detection
With the Power On Detection feature, the switch automatically switches to the
next powered-on computer if one computer is powered off. This feature is
enabled by default. To disable Power On Detection, do the following:
1. Invoke HSM (see page 13).
2. Press [E] or [e].
This procedure is a toggle. Repeat to enable.
Keyboard Operating Platform
The CS72D / CS74D’s default port configuration is for a PC compatible
keyboard operating platform. If your console uses a PC compatible keyboard
and you have a Mac attached to a port, for example, you can change the port’s
keyboard operating platform configuration so that the PC compatible keyboard
emulates the Mac keyboard. The procedure is as follows:
1. Bring the KVM focus to the port you want to set.
2. Invoke HSM (see page 13)
3. Press and release the appropriate Function key (see table below). After
completing this procedure, you automatically exit HSM.
(Continues on next page.)
