CS72D / CS74D User Manual
18
Note: nn is a two-digit number that represents the keyboard language code
(US English: 33; French: 08; Japanese: 15).
Restore Default Settings
To reset the CS72D / CS74D to its default hotkey settings, do the following:
1. Invoke HSM (see page 13).
2. Press [R] or [r] [Enter].
See Hotkey Summary Table below.
Hotkey Summary Table
After invoking HSM (see page 13), key in one of the following keys to perform
the corresponding function:
Key Function
[X] / [x] [Enter] Toggles between the default ([Scroll Lock] [Scroll Lock])
and alternate ([Ctrl] [Ctrl]) Port Switching keys.
[K] / [k] [Enter] Toggles the KVM focus.
[S] / [s] [Enter] Toggles the audio focus.
[A] / [a] [Enter] [n] Starts Auto Scan. The KVM focus cycles from port to port
at n second intervals.
Note: Replace n with a number between 1 and 4 (see
Scan Interval details below).
[1] change scan interval to 3 seconds
[2] change scan interval to 5 seconds (default)
[3] change scan interval to 10 seconds
[4] change scan interval to 20 seconds
To exit Auto Scan, press [Esc] or [Spacebar]. Auto
Scanning stops when you exit Auto Scan mode.
[D] / [d] [Enter] Invokes Video DynaSync, ATEN’s exclusive technology
that eliminates boot-up display problems and optimizes
resolution when switching between ports.
[M] / [m] [Enter] Enables/Disables mouse emulation.
[W] / [w] [Enter] Enables/Disables mouse port-switching.
