Hotkey Beeper Control
The Beeper (see Activate Beeper, p. 28) can be Hotkey toggled On and Off.
To toggle the Beeper, key in the following Hotkey combination:
1. Invoke Hotkey Mode (see p. 15)
2. Key in [B]
After you press [B], the Beeper toggles On or Off. The Command Line
displays Beeper On or Beeper Off for one second; then the message
disappears and you automatically exit Hotkey Mode.
Hotkey Summary Table
[Num Lock] + [*]
or
[Num Lock] + [-]
[Port ID] [Enter] Switches access to the computer that
corresponds to that Port ID.
[T] [n] [Enter] Sets the Auto Scan interval to n
seconds - where n is a number from 1 -
255.
[A] Invokes Auto Scan Mode.
When Auto Scan Mode is in effect, [P]
or Left Click pauses Auto Scanning.
When Auto Scanning is paused,
pressing Any Key or another Left Click
resumes Auto Scanning.
[←]
Invokes Skip Mode andSkips from the
current port to the first accessible port
previous to it.
[→]
Invokes Skip Mode andSkips from the
current port to the next accessible port.
[B] Toggles the Beeper On or Off.
2002-12-27
20 CS-88A User Manual
