A SERVICE OF

logo

Chapter 5. Keyboard Operation
41
Hotkey Beeper Control
The Beeper (see ACTIVATE BEEPER, page 29) can be hotkey toggled On and
Off. To toggle the Beeper, key in the following hotkey combination:
1. Invoke Hotkey Mode (see page 37).
2. Press [B]
After you press B, the Beeper toggles On or Off. The Command Line displays
Beeper On or Beeper Off for one second; then the message disappears and you
automatically exit Hotkey Mode.
kh15816.book Page 41 Tuesday, November 27, 2007 1:05 PM