PN0108 User Manual
32
Device Selector
Since up to 16 PN0108 Stations can be daisy
chained, this panel lists each of the Stations on
your installation. The number in brackets, to the
right of the title, indicates the total number of
stations on the installation.
The names of the Stations are listed in the list box
below the title. To select a Station for power management, click on the arrow
to drop the list down; then click to select the Station you want to work with.
When you select a Station, its Power Status & Control screen displays in the
large central panel.
Note: 1. Each PN0108's Station ID is displayed in the Station ID LED on its
front panel (see Station ID LED, page 6).
2. The outlets in the Power Status & Control screen are only in effect for
the Station that is selected in the Device Selector.
Device Control
With the exception of Status, the buttons in the
Device Control panel are used by the
Administrator to configure the power
management options of the Station that is
currently selected in the Device Selector panel.
These functions are explained in Chapter 5,
Administration.
Clicking the Status button brings up the Power
Status screen for the currently selected device
(see Device Selector, above). The Power Status
Screen is discussed in the next section.
