39
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
NEDERLANDS
SVENSKA
ESPAÑOL
PORTUGUÊS
Setting the Station
There are a number of ways to set the
station.
Automatic station search
➮ Press the or button, :.
The next station that can be received is
tuned in.
Manual station tuning
You can also tune to the station manu-
ally.
➮ Press the or button, :
.
Note:
● Manual station tuning is only possi-
ble if the RDS convenience func-
tion is deactivated.
Browsing a chain of stations
(FM only)
If a station is providing several programs
it is possible to browse through this
“chain” of stations.
➮ Press the or button, :, in or-
der to change to the next link in the
station chain.
Note:
● In order to use this function, the
RDS convenience function must be
active.
You can only change in this way to a
station that you have already received
at least once. Use the Scan or Travel-
store function for this purpose.
Adjusting the Sensitivity of the
Station Search
You can choose whether to search only
for stations with strong signals, or wheth-
er weak stations should be included.
➮ Press the MENU button, 8.
➮ Press the or button, :, as
often as is necessary for “SENS” to
appear in the display.
➮ Press the button, :.
The current value of the sensitivity is
shown on the display. “SENS HI6” indi-
cates maximum sensitivity, and “SENS
LO1” the lowest. If “SENS LO” is cho-
sen, lo appears in the display.
➮ Adjust the desired sensitivity with
the
or key, :.
➮ When the setting process is com-
plete, press the MENU button, 8,
or OK, ;.
Saving a Station
Saving a Station Manually
➮ Choose the desired memory level
from FM1, FM2, FMT or one of the
other wavebands, MW or LW.
➮ Tune to the station you want.
➮ Choose one of the station buttons
1 - 6, >, on which you want to
store the station, and hold it
pressed for longer than two sec-
onds.
RADIO OPERATION
