•“Reverse an image for iron-on transfers” on page 66
•“
Print a group of addresses on labels or envelopes” on page 67
Load a CD/DVD
In addition to printing on paper, the HP All-in-One enables you to print directly on the
surface of specially coated CDs and DVDs for print jobs started from a connected
computer. You can design and create a custom label for your CD or DVD using the
software that came with the HP All-in-One. You can then print the label on your printable
CD or DVD media.
TIP: It is recommended that you write your data to the CD or DVD before printing
the label on it.
NOTE: The HP All-in-One does not support a CD/DVD print job started from the
control panel. You must use the software that came with the HP All-in-One to print on
a CD/DVD. For more information, see the software help.
To load a regular-size (120 mm) CD/DVD on the CD/DVD tray
1. If the product is placed close to a wall, move it at least 7.5 cm (3 inches) away from
the wall.
2. Carefully remove the CD/DVD holder from the storage area below the main paper
tray.
3. Securely snap the inkjet printable media onto the CD/DVD holder with the printable
side up.
NOTE: The CD/DVD should be placed on the ring at the end of the holder with
the arrows.
Load a CD/DVD 45
Load originals and load paper
