1-8
$3 MODE SWITCHES
Selects the desired mode. (p. 3-8)
• Announces selected mode via the speech synthesizer.
(p. 12-15)
Selects USB and LSB modes alter-
nately.
Selects CW and CW-R
(CW reverse)
modes alternately.
➥ Switches between RTTY and PSK
mode.
➥ Switches RTTY and RTTY-R
(RTTY
reverse)
mode when pushed and held
for 1 sec. in RTTY mode.
➥ Switches PSK and PSK-R (PSK re-
verse)
mode when pushed and held
for 1 sec. in PSK mode.
Selects AM and FM modes alternately.
➥ Selects SSB, AM or FM data mode
(USB-D, LSB-D, AM-D, FM-D) when
pushed in SSB, AM or FM mode, re-
spectively.
➥ Switches D1, D2 and D3 when
pushed and held for 1 sec.
$4 QUICK TUNING SWITCH [TS]
➥ Turns the quick tuning step ON and OFF.
(p. 3-6)
• While the quick tuning indicator, “Z,” is displayed
above the frequency indication, the frequency can be
changed in programmed kHz steps.
• 0.1, 1, 5, 9, 10, 12.5, 20 and 25 kHz steps are avail-
able for each operating mode independently.
➥ When the quick tuning step is OFF, push and
hold for 1 sec. to turn the 1 Hz tuning step ON
and OFF. (p. 3-7)
➥ When the quick tuning step is ON, push and hold
for 1 sec. to enter quick tuning step set mode.
(p. 3-6)
$5 VFO SELECT SWITCH
Switches the selected VFO between the VFO-A and
VFO-B when pushed.
• Switches between transmit frequency and receive fre-
quency when the split frequency function is ON. (p. 6-6)
$6 MEMORY WRITE SWITCH (p. 8-3)
Stores the selected readout frequency and operat-
ing mode into the displayed memory channel when
pushed and held for 1 sec.
• This function is available both in VFO and memory
modes.
MW
A/B
DATA
AM/FM
RTTY/PSK
CW
SSB
1
PANEL DESCRIPTION
