q S/RF METER (pgs. 3-10, 3-11)
Shows the signal strength while receiving. Shows
the relative output power, SWR, ALC or compres-
sion levels while transmitting.
•Atotal of 3 meter types are available.
w SHIFT FREQUENCY INDICATOR (p. 5-12)
Shows the shift frequency of the IF filter.
e BAND WIDTH INDICATOR (p. 5-12)
Shows the passband width of the IF filter.
r BANDPASS FILTER INDICATOR
Appears when the narrow filter (500 Hz or less) is
selected during CW, RTTY or PSK31 operation.
t PASSBAND WIDTH INDICATOR (p. 5-12)
Graphically displays the passband width for twin
PBT operation and center frequency for IF shift op-
eration.
y NOTCH INDICATOR (p. 5-18)
➥ “” appears when the manual notch function
is in use. This function is available in SSB, CW,
RTTY, PSK and AM modes.
➥ “” appears when the auto notch function is
in use. This function is available in SSB, AM and
FM modes.
u RTTY TUNING INDICATOR
Shows the tuning condition in RTTY mode.
