Invacare Adjustable ASBA Seat Manual

A SERVICE OF

next previous

SECTION 8—ARMS

Adjustable ASBA Seat 46 Part No 1143238

Adjusting the Height of the Cantilever Arms

NOTE:Forthisprocedure,refertoFIGURE 8.4.

1. Adjusttheangleofthecantileverarmstoallowaccesstothehardwarethatattaches

themountingbracketstothebackcanes.RefertoAdjustingtheAngleofthe

CantileverArms.

2. Loosenthethreescrewsthatsecurethebackcanemountingbrackettothebackcane.

Repeattoloosentheoppositebackcanemountingbracket.

3. Adjustthepositionofmountingbracketsandspreaderbarupordownthebackcane

todesiredheight.

4. Tightenthescrewsonbothbackcanemountingbracketstosecurethebackcane

mountingbracketsatthedesiredheightobtainedinSTEP3.

5. Adjusttheangleofthecantileverarmstoaccommodatetheuser.RefertoAdjusting

theAngleoftheCantileverArmsonpage 47.

FIGURE 8.4 Adjusting the Height of the Cantilever Arms

Screws

(STEP 2)

Back Cane Mounting Bracket

Adjust angle of Cantilever Arm

(STEP 1)