Invacare Adjustable ASBA Seat Manual

A SERVICE OF

next previous

SECTION 12—JUNIOR SEATS

Adjustable ASBA Seat 72 Part No 1143238

Adjusting the Seat Width

NOTE:Forthisprocedure,refertoFIGURE 12.3onpage 73.

NOTE:For12or13‐inchwidths,theseatpanmustbepositionedbetweenthebackcanebrackets

andtheseatrails.RefertoRemoving/InstallingtheSeatPanonpage 68torepositiontheseatpan.

1. Removethespreaderbar.RefertoRemoving/InstallingtheSpreaderBaronpage 59.

2. Removethehexscrewandcovedwashersecuringeachcrossbartotheseatframe.

3. Pull/pushthesiderails(Detail“B”)tothedesiredwidthshowninthefollowingtable.

4. Alignthecrossbarmountingholeswiththeseatframemountingholes.

5. Secureeachcrossbartotheseatframewitha

hexscrewandcovedwasher.Torquethe

hexscrewto75in‐lbs±20%.

6. Adjustthespreaderbar.RefertoAdjustingSpreaderBarWidthonpage 60.

7. Installthespreaderbar.RefertoRemoving/InstallingtheSpreaderBaronpage 59.

Junior Seat Width Mounting Holes

SEAT

WIDTH

CROSS BAR MOUNTING HOLES*

(FRONT VIEW)

12-INCH

13-INCH

14-INCH

15-INCH

16-INCH

*NOTE:Onlyleftsiderailshown.Usethesamemountingholeforoppositesiderail.