Interpreting the Charging Pocket LEDs
Interpreting the Charging Pocket LEDs
The status of the charge operation is indicated by the color of the LED for each charging pocket.
RED Continuous - on any charge pocket
l Continuous red means the battery pack is charging.
RED FLASHING - on all charge pockets
l Battery charger fault or failure.
GREEN - on any charge pocket
l Continuous green means the battery pack charge is complete - Battery is Ready.
YELLOW - on any charge pocket
l Continuous yellow / amber means the battery pack temperature is out of range. The charging pocket is in standby mode
while the pocket waits for the battery pack to warm up or cool down.
NO LIGHT - on a charge pocket
l No light on a charge pocket means there is no battery pack installed
l or the battery pack in the pocket is not fully inserted
l or a defective or damaged battery pack is installed
l or the charger is defective or damaged. Refer to Troubleshooting.
NO LIGHT - on all charge pockets
l No light means there is no AC power applied to the Multi-Charger.
E-EQ-MX3XCHGROG-C-ARC [ 7 ] MX3X Battery Charger User Guide
