Fax settings
Image rotate transmission
Default setting: ON.
When this feature is activated, if you set letter-sized document in the sideways
direction( ), the image will be sent rotated by 90°.
1
Press
MENU
,
J
, 0, 3, [Enter].
2
Choose desired setting you want using the cur-
sor key. Then press [Enter].
3
Press
RESET
to return to the standby mode.
Setting the confirmation stamp
Default setting: OFF.
You can set your fax machine so that it will automatically place a small blue ink
stamp mark on the front of each original document that it successfully scans.
Important: Turn off this feature if you’re sending documents you don’t want the
fax to stamp.
1
Press
MENU
,
J
, 1, 4, [Enter].
The
LCD
shows your fax’s current setting:
2
Select “On” or “Off” using the cursor key.
3
Press [Enter] to save the setting.
4
Press
RESET
to return to the standby mode.
3.71
Fax Features Getting Started
