1.6
Getting started
Changing Fax/Copy mode
When you use your machine as a copier, for making copies or setting copy functions,
press
COPY
. As a facsimile, for fax transmission or setting fax functions, press
FAX
.
The
LCD
shows the machine’s status, error messages and function menu.
Copy standby display
1
Operational status or messages, paper size currently selected and
reduce/enlarge ratio.
2
Currently selected paper cassette and the machine’s status.
3
Various items are displayed according to the operation. When it is shown with
double or more lines, it means that you can select more items. Press
NEXT
to
show the more items.
4
Copy reduction or enlargement ratio.
5
Number of copies.
6
In this area, displays the selected function’s icon or error message. When you
set the copy function(s), the icon corresponds with the selected function is dis-
played. See right column for details.
Advanced copy menu display
To access the advanced copy menu, press
MENU
.
Note: To access the copy setting menu, press [Copy Set]. (See page 2.25.)
To access the machine setting menu, press [Mach Set]. (See page 4.6.)
Function Icon list
Combine Binding Margin Duplex copies
Image Repeat
Directional
Mix Length
Magnification
Series copy Negative/Positive Booklet copies
Erase border Last copy job Sorting
Erase center Top up copy Shift sort
Note: Booklet copies function requires an optional duplex print unit, and shift sort
function requires an optional shift tray.
Note: When you select an item on the
LCD
, it becomes highlighted.
Items appearing with gray cannot be selected.
Panel display (Liquid Crystal Display)
